Innovative Solutions for Automotive Vehicles
| A Study of Parameters influencing the Performance of a Pressure Wave Supercharger (PWS) | |
| Vladimir MARDARESCU, Gheorghe-Alexandru Radu, Marius Hirceaga, Cristian LEAHU |
| POSIBILITIES TO IMPROVED HOMOGENEOUS CHARGE IN INTERNAL COMBUSTION ENGINES, USING C.F.D. PROGRAM | |
| Alexandru-Bogdan MUNTEAN, Anghel CHIRU, Ruxandra STANESCU, Cristian SOIMARU |
| Design and Modeling of Heat Recovery System in Diesel Particulate Filter | |
| Wladyslaw Mitianiec |
| A New Design of Two-Stroke Engine for Automotive Application | |
| Wladyslaw Mitianiec, Konrad Buczek |
| DESIGNING AND MANUFACTURING A TEST BENCH FOR TESTING ENGINE VARIABLE VALVE TIMING SYSTEM ELECTROVALVES | |
| Anghel Chiru, Silviu-Florian Sararu, Eduard Golovatai-Schmidt |
| ACTUATING AND DATA ACQUISITION SYSTEMS USED IN CASE OF A TEST BENCH FOR TESTING ENGINE VARIABLE VALVE TIMING SYSTEM ELECTROVALVES | |
| Anghel Chiru, Silviu-Florian Sararu, Eduard Golovatai-Schmidt |
| EXPERIMENTAL RESEARCHES REGARDING TESTING LIFETIME AND MONITORING THE BEHAVIOUR OF THE VARIABLE VALVE TIMING SYSTEM ELECTROVALVES ON A TEST BENCH | |
| Silviu-Florian Sararu, Anghel Chiru, Eduard Golovatai-Schmidt |
| METHOD TO DETERMINE THE SUPERCAPACITOR FEATURES IN ENGINE STARTING APPLICATION OF GROUND MOVING VEHICLES | |
| Adrian Novac, Gheorghe LUNCA, Mariana LIHTETCHI |
| A STUDY ABOUT FUEL CONSUMPTION AND SLIP VARIATIONS FOR VEHICLES WITH INTEGRAL TRACTION COMPARED TO SINGLE AXLE TRACTION | |
| DAN-SPIRIDON DASCALESCU, Adrian Sachelarie, Radu DROSESCU, Mihai SAVISCHI |
| REAL TIME SIMULATION OF DRIVETRAIN LAUNCH DEVICES | |
| Marius Bataus, Andrei Maciac, Mircea Oprean, Cristian Andreescu, Nicolae VASILIU |
| CONTROLLING COMBUSTION IN HCCI DIESEL ENGINES | |
| Nicolae Ispas, Mircea Nastasoiu, Mihai Dogariu |
| RESEARCH ON THE EXHAUST GASES BACKPRESSURE EFFECT REGARDING THE FILLING AND THE DYNAMIC PERFORMANCES OF THE SPARK IGNITION ENGINES | |
| Andrei Busoi, Florian Ivan, Dumitru CRISTEA |
| MULTIBODY ANALYSIS OF THE FINGER FOLLOWER VALVETRAIN SYSTEM | |
| Gabriel SANDU, Corneliu COFARU, Liviu JELENSCHI, Serban RADU |
| Driver model during straight line motion | |
| Miroslav Demic, Jovanka Lukic |
| ISSUES REGARDING THE APPLICATION OF HYDRODYNAMIC AND HYBRID BEARINGS IN THE CONSTRUCTION OF TURBOCHARGES | |
| Cosmin-Constantin Boricean, Ioan-Calin Rosca |
| ON THE EIGENVALUES AND VECTORS IN ROTORDYNAMICS WITH APPLICATIONS ON TURBOCHARGERS | |
| Cosmin-Constantin Boricean, Ioan-Calin Rosca |
| Numerical optimization of vehicle design in order to decrease fuel consumption and emission of toxic gases | |
| Zeljko Sakota, Zlatomir Zivanovic, Djordje Diligenski, Zoran Masonicic |
| Kinematics of a Variable Compression Ratio Engine | |
| Paul GRIGORE, Adrian GABOR, Sorin VLASE, Eugenia SECARA |
| Improving energetical and environmental performance of Diesel engines, by the efficiency supercharge process | |
| Cristian-Ioan Leahu, Gheorghe-Alexandru Radu, Vladimir Mardarescu, Marius Harciaga |
| Automatic transmission for small displacement motor-scooters | |
| Riccardo Bartolozzi, Francesco Frendo |
| ANALYSIS OF THE THERMAL COMFORT IN VEHICLES | |
| Radu Musat, Elena Helerea |
| Advanced engineering research possibilities using the roller brake tester and diagnosis equipments | |
| Cristina-Andreea Marc, Doru Baldean, Nicolae Burnete, Bogdan Varga, Mihai-Aurel Crisan |
| NUMERICAL SIMULATION OF AIR VELOCITY PROFILES INSIDE CAR CABIN | |
| Catalin NEACSU, Mariana IVANESCU, Ion TABACU |
| REDESIGNING THE COMBUSTION CHAMBER OF A SI ENGINE IN ORDER TO HAVE OPTIMAL COMBUSTION PROCESS USING ALCOHOLS | |
| Levente Kocsis, Nicolae Burnete, Adrian Costea |
| Information Security-the Dark Side of the Smart Car | |
| Eugen-Mihai Negrus, Ron Davidescu |
| Hardening the Transportation System information Security | |
| Eugen-Mihai Negrus, Ron Davidescu |
| Improvement of work parameters in direct injected two-stroke engine | |
| Wladyslaw Mitianiec, Marian Forma, Lukasz Rodak |
| NUMERICAL ANALYSIS OF HYDRAULIC VALVE ACTUATION ON INTERNAL COMBUSTION ENGINE INLET FLOW PERFORMANCES | |
| Mihaela Coldea, Anghel Chiru |
| The influence of the EGR rate on a HCCI engine model calculated with the single zone HCCI method | |
| Radu COSGAREA, Corneliu COFARU, Mihai ALEONTE |
| The Importance Of Introducing The One-Way Valves Around The Forks Of The Hydraulic Installation Of A Hybrid - Hydraulic Vehicle | |
| Vlad-Constantin Serbanescu, Horia Abaitancei, Gheorghe-Alexandru Radu, Sebastian Radu |
| The variation of Power obtained by serial and parallel connection of a shock absorber energy recovery system installed on a hybrid hydraulic vehicle | |
| Vlad-Constantin Serbanescu, Horia Abaitancei, Gheorghe-Alexandru Radu, Sebastian Radu |
| The Sonic Asynchronous Motor for Vehicle Applications | |
| Sebastian Radu, Gheorghe-Alexandru Radu, Horia Abaitancei, Bogdan-Danila Comanica |
| The parallel sonic resonator as transmission optimization solution for sonic propulsion systems | |
| Sebastian Radu, Gheorghe-Alexandru Radu, Horia Abaitancei, Mihaela Coldea, Alexandru Lupa |
| The free piston engine as prime mover for converter based vehicle propulsion systems | |
| Horia Abaitancei, Ioan Pop, Gheorghe-Alexandru Radu, Ioana Pop-Denes, Paul Vidican, Sebastian Radu |
| Sonic propulsion system, an overall view of possible solutions | |
| Horia Abaitancei, Dan Abaitancei, Gheorghe-Alexandru Radu, Sebastian Radu |
| Modern Thermal Management for Internal Combustion Engines | |
| Eduard Golovatai-Schmidt, Elmar Mause, Markus Popp |
| DESIGNING AND TESTING OF A GEARBOX CONTROL ELECTRONIC SYSTEM AS PART OF ELECTRONIC MANAGEMENT SYSTEM FOR DIESEL ENGINES | |
| Ilie Dumitru, Mihnea Cataneanu, Theodor-George Oprica, Victor Otat |
| The remote monitoring of joint coordinates for comfort dummy in the passenger car using 3-d video surveying | |
| Inbae Chang, Lee Kyuhwan, Kim Byeongjin |
| Simulation modeling, assessment and energy management of the innovative concept of series hydraulic hybrid for passenger cars | |
| Mohamed Ibrahim, Hubertus Murrenhoff |
| A Multi-disciplinary Design Optimisation Approach to Cam-phasing Optimisation | |
| Felician CAMPEAN, XueFei YIN, Alastair WOOD |
| Evaluation of Fitting Techniques for Engine Response Models for Model Based Calibration | |
| Felician CAMPEAN, Karthik ANANTA, XueFei YIN, Dan GROVE |
| Process optimization of a high-performance car diesel engine by correlated complex modelling and diagnostics | |
| Cornel Stan, Soeren Taeubert |
| Chassis systems - Schaeffler is more than just bearings | |
| Manfred Kraus, Florin Dobre |
| 3Cam- The contiuously variable shifting valve train | |
| Jens Schaefer, Michael Wensing, Sebastian Zwahr, Cristian Tanasie |
| A SIMULATION OF THERMAL PERFORMANCE OF PASSENGER SEGMENT OF COMMUTER VEHICLES | |
| Ola Kamiyo, Dolapo Awe |
| DOWNSIZING ENGINES: TOP OR FLOP? | |
| Karl-Nikolaus REGAR |
| DEVELOPMENT AND IMPROVEMENTS OF THE DUAL MASS FLYWHEEL | |
| Hanna Peter, Hartmut Mende, Ion-Lucian Buzea, Imre-Tibor Mathe |
| UniAir: First variable electro-hydraulic valve control system in mass production | |
| Razvan ANCA, Michael HAAS, Martin RAUCH |
| EXPERIMENTAL INVESTIGATION OF THE HEAT PIPES HEAT EXCHANGERS | |
| Gabriela HUMINIC, Angel HUMINIC, Virgil-Barbu UNGUREANU |
| ENTROPY GENERATION ANALYSIS FOR ENERGETICALLY OPTIMIZATION OF COMBUSTION ENGINES RADIATORS | |
| Gabriela HUMINIC, Victor BENCHE, Angel HUMINIC |
| AUTOMOTIVE WING WITH COANDA EFFECT | |
| Angel HUMINIC, Gabriela HUMINIC |
| Creativity - a Chalenge for Automotive Engineering student's Department of "Ovidius" University CONSTANTA | |
| Laurentiu Manea, Adriana-Teodora MANEA Manea |
| MODELLING THE CAR WHEEL GUIDING MECHANISMS USING THE MULTIBODY SYSTEM METHOD | |
| Ion Visa, Mihai Comsit |
| DOES VARIABLE VALVE TIMING SYSTEM INFLUENCE THE INTERNAL COMBUSTION ENGINE'S PERFORMANCES? | |
| Cristian Soimaru, Anghel Chiru, Bogdan Muntean |
| Ways of improving the performances of the particle filters (FAP) used in depolluting the quick Diesel engines | |
| Florian IVAN, Daniel LITA |
| ANALYSIS OF SOME OPERATING PARAMETERS OF S.I.E. FROM SEAT LEON IN DIFFERENT ROAD CONDITIONS USING A NEW TESTING TECHNOLOGY | |
| Mihai-Aurel Crisan, Doru Baldean, Cristina-Andreea Marc |
| MAGNETIC FIELD EFFECT ON FUNCTIONAL PARAMETERS OF AN INTERNAL COMBUSTION ENGINE | |
| Ioan TEBEREAN, Nicolae ROTARU |
| Integration of hydraulic converter as variable flow pump in the hydraulic hybrid propulsion system | |
| Aron-Adrian Petric, Gheorghe-Alexandru Radu, Bogdan-Comanica Danila, Sebastian Radu, Ionut Soare |
| Identify the flow processes in hydraulic converter as pump with variable flow | |
| Aron-Adrian Petric, Gheorghe-Alexandru Radu, Bogdan-Comanica Danila, Sebastian Radu, Ionut Soare |
| Fluid power energy generator using free piston engine | |
| Ionut-Tudor SOARE, Gh-Alexandru RADU, Horia ABAITANCEI, Adrian PETRIC, Holger BRUSS |
| Free piston hydraulic energy generator using the Stirling engine principle | |
| Ionut-Tudor SOARE, Gh-Alexandru RADU, Horia ABAITANCEI, Sebastian RADU, Adrian PETRIC |
| STATE OF THE ART IN THE ON-BOARD VEHICLE INDICATIONS FOR IMPROVING THE DRIVING STYLE | |
| Catalin Zaharia, Adrian Clenci, Ion Tabacu, Alexandru Boroiu |
| AUTOMATIC GEABOX TEST AND DAIGNOSIS ON A TEST-BED | |
| Bogdan-Ovidiu Varga, Nicolae Burnete, Ioan Rus, Dan Moldovanu |
| Development of a DI Diesel combustion chamber for a 100 mm opposed piston engine | |
| Adrian TUSINEAN |
Automotive Vehicles and Environment
| Alternative fuels for road transport | |
| Roger Sierens, Sebastian Verhelst, Joachim Demuynck, Jonas Galle, Jeroen Vancoillie |
| THE DETERMINATION OF SOME FUEL PROPERTIES FOR BIOETHANOL - GASOLINE MIXTURES | |
| Hasan Celikten, Mustafa Acaroglu |
| Effects of methyl esters derived from sunflower oil on lubricity and corrosion of diesel fuels | |
| Diana-Luciana Cursaru, Constantin Tanasescu, Ana-Maria Manta, Dragos Ciuparu |
| EFFECTS OF E2, E20, E30 BIOETHANOL-GASOLINE BLENDS ON VEHICLE EMISSIONS AND PERFORMANCE | |
| Hasan Aydogan, Mustafa Acaroglu, A.Engin Ozcelik |
| STUDY ON PHISICO-CHEMICAL PROPERTIES OF ALTERNATIVE FUELS | |
| Anghel Chiru, Sorin Sacareanu |
| ANALYSIS ON WORLD ENERGY RESERVES AND BIOMAS FUEL SOLUTION | |
| Anghel Chiru, Sorin Sacareanu |
| RESEARCH REGARDING THE USE OF CALCIUM OXIDE AS HETEROGENEOUS CATALYST FOR BIODIESEL SYNTHESIS | |
| Anca SAUCIUC, Lucia DUMITRESCU, Ileana MANCIULEA |
| LPG - ECOLOGICAL FUEL FOR AUTOMOTIVE DIESEL ENGINE | |
| Constantin PANA, Niculae NEGURESCU, Marcel-Ginu POPA, Alexandru CERNAT |
| Microalgae biodiesel - energy source of the future in the automotive sector | |
| Ruxandra Stanescu, Anghel Chiru, Bogdan Muntean |
| Liquid biofuel production from biomass: processes and equipments | |
| Ruxandra Stanescu, Anghel Chiru, Bogdan Muntean |
| DESIGN AND DEVELOPMENT OF A HYBRID PROTO TYPE CAR | |
| DANAIAH PULI, RAVI-KUMAR PULI |
| INTELLIGENT CONTROL SYSTEM USED FOR INCREASING THE ENERGY EFFICIENCY OF THE ELECTRIC VEHICLES - REDUCED SCALE MODEL | |
| Ana-Maria PUSCAS, Marius-Catalin CARP, Paul-Nicolae BORZA |
| Improving performances for a lower emission diesel-gas engine | |
| Liviu MIHON, Daniel IORGA, Ioan HITICAS, Sorin RATIU, Walter SWOBODA |
| THE INFLUENCE OF OXIDATION ADDITIVES TO THE FUEL PROPERTIES IN COTTONSEED OIL MTHYL ESTER | |
| Fatih AYDIN, Ali Ozuluyol, Mustafa Acaroglu |
| BIO-ETHANOL OBTAINED FROM WOODEN BIOMASS, APPROPRIATE ALTERNATIVE FUEL FOR SPARK IGNITION ENGINES | |
| Laurentiu FARA, Cristian-Alexandru RACOVITZA, Lucian LOBONT |
| SEQUENTIAL LPG SYSTEMS AND INSTALLATION FAILURES IN GASOLINE VEHICLES | |
| Fatih AYDIN, Mustafa ACAROGLU |
| The study of fuel mixture ignition in internal combustion engines by unconventional methods | |
| Dinel POPA, Marcel DEJANU, Traian DASCALU, Ion TABACU |
| Investigation Of Diesel Fuel, Rapeseed - 00 Oil And Cotton Oil Methyl Esters Effects On A Turbocharged Diesel Engine Performance | |
| A. Engin OZCELIK, Hasan AYDOGAN, Mahmut UNALDI |
| APPLICATION ON AN UPDATED FINITE ELEMENT MODEL OF AN ENGINE IN THE AUTOMOTIVE INDUSTRY | |
| Gabriel-Petru Anton, Mihai Paval, Fabien Sorel, Mihai Mandru |
| Study of the automotive fuel and oil pollution influences upon some plants in different conditions | |
| Cristina-Andreea Marc, Doru Baldean |
| Rapid Fuel Properties Estimation through Chemometric Modeling of NIR Spectra | |
| Istvan Barabas, Adrian Todorut, Doru Baldean, Levente Kocsis |
| Comparative Study of Alternative Renewable Energies | |
| Ioana MOLDOVEANU, Ulf POLZIN, Patrick VIKARI, Peter ZIMA |
| Trend Analysis of Worldwide Fuel Qualities and Impact on Engine System Development | |
| Joerg NEUGAERTNER, Ioana MOLDOVEANU |
| Experimental studies of sound absorption coefficient of composite materials used for acoustic treatments of the cabins | |
| Nicusor DRAGAN |
| Dynamic modelling of the response of the viaduct subjected on traffic actions - modal calculus | |
| Polidor BRATU, Nicusor DRAGAN |
| Experimental analyse of the shocks between the tyres of the mobile equipment and the reinforced concrete bridges | |
| Nicusor DRAGAN, Polidor BRATU |
| HYDROGEN ASSISTED COMBUSTION IN DIESEL ENGINE | |
| Adrian Birtas, Iulian Voicu, Gheorghe Niculae, Radu Chiriac, Nicolae Apostolescu, Cristian Petcu |
| Thermodynamic aspects of fuel cell systems | |
| Stanislaw Sieniutycz |
| COMPARATIVE EVALUATION OF ON-ROAD TESTS CONDUCTED ON A SI ENGINE TO RUN ON COMPRESSED NATURAL GAS | |
| Rajesh Iyer, S.A. Channiwala, T.R. Seetharam |
| ABOUTH THE ACOUSTIC ENERGY RECOVERED FROM INTERNAL COMBUSTION ENGINE EXHAUST GASES NOISE | |
| Nicolae Filip, Nicolae Jumate, Ilie-Horia Vasile |
| RECYCLING BIOMASS WASTE AS BIOETHANOL | |
| Lucia Dumitrescu, Ileana Manciulea, Anca Sauciuc, Claudia Zaha |
| RESEARCH REGARDING THE POSSIBILITIES TO USE AS FUEL THE WASTE POLYETHYLENE | |
| George-Liviu Popescu, Nicolae Filip |
| The Influence of Diesel Fuel and RME Blends on Exhaust Emissions from a Passenger Car Diesel Engine | |
| Miloslaw Kozak, Jerzy Merkisz, Jacek Pielecha, Maciej Andrzejewski |
| IMPROVEMENT OF COLD STARTABILITY OF A BIODIESEL FUELLED ENGINE USING THE INJECTION OF VOLATILE SUBSTANCES IN THE INTAKE MANIFOLD | |
| Rodica NICULESCU, Adrian CLENCI, Sergiu STROE |
| A DETAILED STUDY REGARDING THE BIODIESEL MARKET AND PRODUCTION CAPACITIES IN ROMANIA | |
| DRAGOS TUTUNEA |
| HOW SUSTAINABLE IS THE SUSTAINABLE TRANSPORTATION | |
| Anca Duta, Ion Visa |
| TRENDS IN INTEGRATED PHOTOVOLTAIC SOLUTIONS FOR THE DESIGN OF NEW CARS GENERATION | |
| Mihai COMSIT, Ion Visa |
| METHOD FOR BUILD UP AND DESCRIPTION OF THE EFFECT OF FUEL DEPOSITS BY BIODIESEL ON INJECTORS | |
| Andreas Ellenschlager, Dietmar Zeh, Paul Guempel, Wolfgang Bleck, Frieder Buerkle, Alexander von Stockhausen |
| STUDY OF DIESEL FUEL INJECTION SYSTEM USING ADVANCED METHODS | |
| Doru Baldean, Dan Moldovanu, Bogdan Varga, Emilian Borza, Levente Kocsis |
| STUDY OF DIESEL FUEL COMBUSTION PROCESS USING ADVANCED SYMULATION METHODS | |
| Doru Baldean, Nicolae Burnete, Istvan Barabas, Emilian Borza |
| A STUDY REGARDING HYBRID ELECTRICAL VEHICLES | |
| Eliza Chircan, Bogdan Benea |
| A BRIEF DISCUSSION ON BIOFUEL PRODUCTION | |
| Bogdan Benea, Eliza Chircan |
| THE BURNING OF LEAN MIXTURES IN SPARK IGNITION DIRECT INJECTION ENGINES | |
| Dinu Fodor, Tudor Mitran, Horia Beles, Nicolae Fantana |
| BIOFUELS - ALTERNATIVE ENERGY SOURCE IN ROMANIA | |
| Nicolae Burnete, Bogdan Varga, Doru Baldean, Petre Bolba |
| DESIGN OF AN AIR COOLED CYLINDER HEAD FOR TWO FAMILYS OF DIESEL ENGINES WITH DIRECT INJECTION | |
| Vladimir Mardarescu, Constantin Haseganu, Sebastian Radu, Ervin Adorean, Calin Itu, Marton Iakab-Peter |
| COMBUSTION AND EMISSIONS ANALYSIS OF DIFFERENT ALCOHOL BLENDS IN A 2 STROKE OTTO - ENGINE | |
| Mihai Aleonte, Radu COSGAREA, Corneliu COFARU, Kai BECK, Amin VELJI, Ulrich SPICHER |
| Virtual simulation and optimization of an engine mount system | |
| Calin Husar |
| TUN-UP A DIESEL EXPERIMENTAL SINGLE CYLINDER ENGINE WITH A COMMON-RAIL INJECTION EQUIPMENT | |
| Mihai Dogariu, Nicolae Ispas |
| EXPERIMENTAL RESEARCHES REGARDING THE POSSIBILITY OF AUTOMATION OF A CONVENTIONAL GEARBOX | |
| Mihai Dogariu, Nicolae Ispas |
Advanced Transport Systems and Road Traffic
| Analysis of a Driving Cycle Proposed for Brasov City | |
| Dinu Covaciu, Ion Preda, Daniela Florea, Janos Timar, Ovidiu-Vasile Campian |
| OPTIMIZATION METHODS REGARDING THE BUILDING TRANSFER IN LIMA SOFTWARE | |
| Janos Timar, Mariana Stanciu, Corneliu Cofaru, Daniela Florea, Dinu Covaciu, Ionatan Popa |
| DIGITAL SYSTEM FOR MONITORING AND MANAGEMENT OF INDIVIDUAL OR FLEET AUTOMOTIVE VEHICLES | |
| Marius-Cristian LUCULESCU, Claudiu-Iulian ENACHE |
| Using multi-sensor fusion and digital maps for driver assistance systems | |
| Corneliu-Mihail Alexandrescu, Mihai Niculescu |
| Sensors and Algorithms for Line Tracking in Mobile Robots Navigation | |
| Adrian Dumitriu, Sorin-Constantin Zamfira |
| THE OPTIMIZATION OF PUBLIC TRANSPORT SYSTEM IN THE SOUTH-EAST AREA OF OLT COUNTY | |
| Sorin ILIE, Alexandru BOROIU, Gabriela MITRAN, Nadia BELU, Viorel NICOLAE |
| TRANSPORT DEMAND MODELLING FOR OPTIMIZING A COUNTY PUBLIC TRANSPORT SYSTEM | |
| Gabriela MITRAN, Sorin ILIE, Alexandru BOROIU, Nadia BELU |
| SETTING OF THE STRATEGIC OBJECTIVES OF THE COUNTY PUBLIC TRANSPORT BASED ON POPULATION MOBILITY AND ON CAPACITY OF TRANSPORTATION OPERATORS | |
| Alexandru BOROIU, Viorel NICOLAE, Sorin ILIE, Gabriela MITRAN |
| VEHICLES IDENTIFICATION AND CLASSIFICATION WITH LASER WAVES | |
| Nicolae Filip, Ioan Simu |
| PRECISION LAYERED MAPPING SYSTEM FOR POLLUTION CONCENTRATION IN THE AUTOMOTIVE FIELD | |
| Ciprian-George Pirna, Simona Lache |
| Optimization of the calculation parameters for street noise mapping in LimA | |
| George Tache, Daniel Comeaga, Bogdan Lazarovici |
| ROAD TRAFFIC CHEMICAL POLLUTION MODELING SYSTEM | |
| Stelian TARULESCU, Radu TARULESCU |
| CHEMICAL POLLUTION PRODUCED BY THE HEAVY VEHICLES IN URBAN AREAS | |
| Stelian TARULESCU, Radu TARULESCU |
| Evaluation of acoustic properties of composite materials with potential application in the sound barriers structures | |
| Mariana-Domnica Stanciu, Janos Timar, Ioan Curtu, Calin Rosca |
| PASSENGER CAR DIMENSIONAL STATISTICS RELATED TO OPTIMAL PARKING SPACE | |
| Costel Bejan, Venetia Sandu |
| MINIMIZING DISTRIBUTION COSTS - DIRECT VERSUS INTERMEDIATE-PLATFORM TRANSPORT | |
| Cristina Manea, Laurentiu Manea |
| VISUALISATION AND SAFETY EVALUATION OF TRUCK ROUTE AND BRAKING DATA | |
| Zoltan Fazekas, Peter Gaspar |
| Alternate Transport system using Magnetics | |
| Tejinder Singh |
| EVOLUTION OF ROAD TRAFFIC IMPACT ON AIR QUALITY IN BUCHAREST CENTRAL AREA | |
| Claudiu-Ion Mija, Octavian-Valeriu Datculescu |
| STUDY REGARDING THE NOISE MAPPING OF URBAN RAIL TRANSPORTATION | |
| Daniela Florea, Janos Timar, Mariana Stanciu, Corneliu Cofaru, Ioan Curtu, Dinu Covaciu |
| OPTIMIZATION METHODS OF URBAN RAIL TRANSPORTATION AND POPULATION EXPOSURE CALCULATION | |
| Janos Timar, Mariana Stanciu, Corneliu Cofaru, Daniela Florea, Anghel Chiru, Dinu Covaciu |
Advanced Engineering Methods
| FINITE ELEMENT ANALYSIS OF TRUCK TYRE MODAL BEHAVIOUR | |
| Raluca Moisescu, Gabriel Anghelache |
| DETERMINATION OF CONTACT FORCE OF A SPUR GEAR ASSEMBLY BY FINITE ELEMENT METHOD | |
| Ovidiu-Cosmin Simionescu, Stefan-Cristian Castravete, Dan-Nicolaie Soca, Eduard-Ionut Sava, Mihai Iutanim |
| Optimization of the endurance test of the vehicle power train | |
| Julian Rothfuss, Michael Butsch, Peter Kuchar, Nicolae Seitz |
| A SIMULATION MODEL OF A MOTORBIKE ENGINE LUBRICATION CIRCUIT | |
| Dario Buono, Adolfo Senatore, Massimo Cardone, Claudio Lombardi |
| STUDYING HOW THE VEHCILES ENGINE OPERATES USING MULTIVARIABLE PROCEDURES | |
| Florin-Constantin Oloeriu, Emanuel-Decebal ILINA, Mihai BODONEA, Giorgiana ROSCA, Ion COPAE |
| DIESEL ENGINE IN-CYLINDER CALCULATIONS WITH OpenFOAM | |
| Ervin Adorean, Gheorghe-Alexandru Radu |
| Data acquisition system based on GPS technology, for vehicle dynamics analysis | |
| Dinu Covaciu, Ion Preda, Ovidiu-Vasile Campian |
| ON THE DESIGN AND CONTROL OF ACTIVE VEHICLE SUSPENSION. THE DUAL OBJECTIV ANALYSIS | |
| Dumitru Nicoara |
| Application of virtual reality techniques in workplace design process on example of stud welding | |
| Filip GORSKI, Maciej KOWALSKI |
| Simulation of performance curve of alternator | |
| Csaba Blaga |
| Considerations about modalities for CAD/FEM design and optimization improvements for the automotive and engine's mechanical structures | |
| Ionut Serban, Gheorghe Bobescu |
| Contributions concerning the optimization of the automotive and engine's mechanical structures in the today realities | |
| Ionut Serban, Gheorghe Bobescu |
| ON THE INVESTIGATION OF THE STRUCTURE BORNE ROAD NOISE IN THE CAR USING THE PRINCIPAL COMPONENT ANALYSIS | |
| Mircea Niculescu, Cristi Irimia, Mihail Grovu, Andi Percescu, Cristina Danasel, Mihai Stoica |
| ENGINE COMBUSTION MODELING FROM DESIGN TO CONTROL | |
| Cristi Irimia, Mihail Grovu, Catalin Vasiliu |
| IMPROVING ENERGY CONSUMPTION THROUGH A FULL VEHICLE ENERGY MODELING APPROACH | |
| Cristi Irimia, Mihail Grovu, Catalin Vasiliu |
| Simulation of performance curves of starter | |
| Csaba Blaga |
| RESEARCHES CONCERNING THE INFLUENCE OF THE HIGH PRESSURE DIE CASTING PROCESS PARAMETERS TO THE STRUCTURAL RESISTANCE OF PINION HOUSINGS | |
| Ferencz PETI, Lucian GRAMA, Inigo LOIZAGA, Attila PUSPOKI |
| The modeling of a motor vehicle behaviour using specialized softwares | |
| Liviu MIHON, Adriana TOKAR, Daniel OSTOIA, Carmen ALIC |
| A NEW TEST METHOD FOR STAINLESS STEELS USED IN AUTOMOTIVE EXHAUST SYSTEMS | |
| Cristina Hoffmann, Paul Guempel |
| Development and validation of a finite elements human head model for impact applications | |
| Stefan Tabacu, Sorin Ilie, Nicolae-Doru Stanescu, Mariana Ivanescu |
| IMPACT STUDY OF THE DOUBLE-SEATED SLED ASSEMBLY PROTOTYPE | |
| Marius Negru, Milan-Stefan Novak, Ioana Tircomnicu |
| STUDY ON STRATEGY FOR REMOVING ALL THE UNWANTED FREQUENCIES PROVIDED BY KNOCK SENSOR COEFFICIENT | |
| Marian Brabete, George Gherghina |
| On the non-linear vibrations of the automobiles | |
| Nicolae-Doru Stanescu, Stefan Tabacu, Sorin ILIE |
| A 3D SEMI-EMPIRICAL STOCHASTIC TIRE MODEL MODEL ON HARD FLAT AND UNEVEN SURFACES | |
| Anake Umsrithong, Corina Sandu |
| Coast-down test - theoretical and experimental approach | |
| Ion PREDA, Dinu COVACIU, Gheorghe CIOLAN |
| MECHATRONIC SYSTEMS: AUTOMOTIVE APPLICATIONS AND MODERN DESIGN METHODOLOGIES IN UNIVERSITIES | |
| George GHERGHINA, DRAGOS TUTUNEA, DRAGOS POPA |
| ICE Model used in an Indoor Testing Bench for Hybrid Structures | |
| Dorin Lucache, Vasile Horga, Ioan Damian, Mihai Albu, Marcel Ratoi |
| Generalized Model of the Pressure Evolution Within the Braking System of a Vehicle | |
| Marin MARINESCU, Radu VILAU, Ion LESPEZEANU |
| CONSIDERATIONS REGARDING THE STUDY OF THE DYNAMIC PERFORMANCE OF VEHICLE BRAKING SYSTEMS | |
| Radu VILAU, Valentin VINTURIS, Marin MARINESCU, Dragos COSTACHE |
| Active/passive answers developed in human subject hands during automotive driving | |
| Mihaela Baritz |
| Pedestrian biomechanical behavior under influences of visual and audio stimulus | |
| Mihaela Baritz, Diana Cotoros, Ana-Viorela Todor |
| VIRTUAL PRODUCT DEVELOPMENT PROCESS FOR ROBUST COMPONENTS AND SYSTEMS | |
| Christoph Brands |
| Influence of the engine oil condition on valve train wear | |
| Klaus Feldner |
| USAGE OF THE EMPIRIC MODELS FOR COMPARATIVE ASSESMENT OF THE VEHICLES MOBILITY | |
| Marian OANA, Ticusor CIOBOTARU |
| EXPERIMENTAL PERFORMANCE OF AN AUTOMOTIVE HEAT PUMP SYSTEM FOR VARIOUS HEAT SOURCES | |
| Murat Hosoz, Mehmet Direk, Ali Turkcan, Ertan Alptekin, Ali Sanli, K.Suleyman Yigit, Mustafa Canakci, A.Feridun Ozguc |
| STUDY ON THE CONSTRUCTIVE OPTIMIZATION OF THE CAR RIM | |
| Ionel Vieru, Eugen-Viorel NICOLAE, Elena NEAGU, Gheorghe PETRACHE |
| Assessment of Ride Quality of Two and Three-Axles Off-Road Vehicles with Active Suspension Using Half-Car Models | |
| Faried Hasbullah, Waleed Faris |
| TESTING PROCEDURE FOR AUTOMOTIVE HYDRAULIC CYLINDERS | |
| Nicolae Sarbu, Vasile Gheorghe, Venetia Sandu, Costel Bejan |
| THERMAL ADJUSTMENT OF COOLING SYSTEMS IN COMMERCIAL DIESEL ENGINES | |
| Venetia Sandu |
| PROPERTIES OF A SYMMETRICAL MECHANICAL SYSTEM USED TO THE VIBRATIONS STUDY OF A TRUCK WITH TWO IDENTICAL ENGINES | |
| Sorin Vlase, Anghel Chiru, Carol Ambrus |
| NEW TOOL TO ASSIST THE STYLING DESIGN OF A NEW CAR | |
| Viorel SISMAN |
| RESERCHES CONCERNING THE BRAKING FORCE UNBALANCE OF TOYOTA AVENSIS ON THE TEST BED | |
| Mihai-Aurel Crisan, Cristina-Andreea Marc, Doru Baldean, Emilian Borza |
| STUDIES CONCERNING EXHAUST GASES DYNAMICS FOR AN IC ENGINE THROUGH SIMULATION | |
| Doru Baldean, Nicolae Burnete, Nicolae Filip |
| THEORETICAL AND EXPERIMENTAL RESEARCH REGARDING THE BRAKING PERFORMANCES OF THE PASSENGER CARS, IN CONCORDANCE WITH THE IMPROVEMENT OF ACTIVE SAFETY AND THE REDUCTION OF ACCIDENTS WITH SEVERE CONSEQUENCES | |
| Horia Beles, Alexandru Rus, Felician Ardelean, Virgil Popa |
Heavy and Special Vehicles
| Test bench evaluation of heavy vehicle supplementary brake systems | |
| Venetia Sandu, Carmen Papadopol, Petre Raducanu, Dorel Turcu, Costel BEJAN |
| ACCELERATION PROCESS OF THE TRACKED VEHICLE WITH HYDRODINAMIC TRANSMISSION | |
| Ticusor Ciobotaru, Valentin VINTURIS, Marian OANA |
| STATISTICAL CHARACTERISTICS OF THE TRUCKS BRAKING IN REAL TRAFFIC | |
| Ticusor Ciobotaru, Valentin VINTURIS, Daniel FRUNZETI |
| Considerations on the mathematical processing of experimental data obtained on specific ways of construction sites | |
| Dinel POPA, Florin-Grigore TECAU, Sebastian PARLAC |
| Flexible fuel engine based on pneumatic fuel injection by means of hot exhaust gases | |
| Wojciech Marek |
| ACCELERATION PROCESS OF THE TRACKED VEHICLE WITH HYDRODINAMIC TRANSMISSION | |
| Ticusor CIOBOTARU, Valentin VINTURIS, Marian OANA |
| RESEARCHES ON THE DIMENSIONAL SYNTHESIS OF THE THREE-POINT HITCH COUPLERS USED AT AGRICULTURAL TRACTORS | |
| Mircea Nastasoiu, Lilian Vasilache, Nicolae Ispas, Adrian Soica, Stelian Nastasoiu |
| RESEARCHES ON THE MATHEMATICAL MODELING OF THE KINEMATICS OF THREE-POINT HITCH COUPLERS USED AT AGRICULTURAL TRACTORS | |
| Lilian Vasilache, Mircea Nastasoiu, Stelian Nastasoiu, Nicolae Ispas, Cristian Simeon |
| DEVELOPMENT AND EXPERIMENTAL RESEARCH OF THE CENTRAL PRESSURE CONTROL SYSTEM FOR AGRICULTURAL TRACTOR TYRES | |
| Simion Popescu, Radu Ciuperca, Mircea Nastasoiu, Florin Loghin |
New Materials, Manufacturing Technologies and Logistics
| INVESTIGATION OF EFFECTS OF PASSENGER CAR BODY RECONSTRUCTION | |
| Milan Milovanovic, Branislav Nedeljkovic, Nenad Vitosevic |
| Life Predictions And Component Fatigue Behaviors Of A Steering Knuckle Using Finite Element Analysis | |
| Bogdan Turturica |
| Development of a Testing Rig for Shape-Memory-Alloys | |
| Ioan-Serban Radu |
| The Incidence of the Quality Management Principles in the Supplier's Quality Management Systems from the Automotive Sector | |
| Laurentiu-Aurel Mihail, Andrei Negrus |
| A 8D's Alternative for Problem Solving During Product Development Process Addressed to Oem's and Their Suppliers | |
| Laurentiu-Aurel Mihail, Andrei Negrus |
| RADIATION PROCESSING FOR AUTOMOTIVE INDUSTRY | |
| Corneliu-Catalin Ponta, Serban-Constantin VALECA, Ioan-Valentin MOISE |
| ANALYSIS OF USING CFK-MATERIAL FOR STEERING COLUMNS COMPONENTS IN PASSENGER VEHICLES | |
| Thomas-W. Heitz |
| Organizing the selection of the primary data regarding the breakdown flux for an auto-vehicle's steering gear, in order to evaluate the reliability indicators | |
| Horia-Marcel Sotoc, Vasile Campian |
| SOUND PROPAGATION IN COMPOSITE PLATES USED IN THE CONSTRUCTION OF STREET SOUNDPROOFING PANELS | |
| Gianina-Ileana STAN, Ioan CURTU |
| Next Generation Fuel System (NGFS) | |
| Adrian Gligor, Carsten Elsasser, Dirk Eulitz, Ken Hannah |
| LIGNOCELLULOSIC COMPOSITES FOR AUTOMOTIVE INDUSTRY | |
| Ovidiu-Mihai TERCIU, Ioan CURTU, Camelia CERBU |
| A new approach for improving the lifetime of some parts made of cast iron, using superficial treatments | |
| Nicolae Boicea |
| STUDY OF THE IMPACT OF THE RAPID PROTOTYPING METHOD ON THE PERFORMANCES OF A DESIGN PROCESS | |
| Daniel-Constantin Anghel, Nadia Belu |
| APPLYING FUNCTIONAL ANALYSIS IN DESIGN STAGE OF A AUTOMOTIVE PART | |
| Nadia Belu, Daniel-Constantin Anghel, Sorin Ilie |
| Implications into the civil field of basic NCW (network centric warfare) principles for providing logistical armored military equipment | |
| Cornel Arama, Marian OANA, Gheorghe BOBESCU |
| Setting up the "cluster" networks and perspectives on modularization of the automotive industry | |
| Cornel Arama, Alin PREDA, Gheorghe BOBESCU |
| Non contact laser forming of construction bars | |
| Piotr Kurp, Zygmunt Mucha |
| APPLICATION OF NANO-FLUID TO IMPROVE HEAT TRANSFER IN THE RADIATOR OF AUTOMOBILE ENGINE | |
| Seyyed-Mohsen Peyghambarzadeh, Seyyed-Hasan Hashemabadi, Milad-Seifi Jamnani, Seyyed-Mohsen Hoseini |
| CONSIDERATIONS REGARDING THE INFLUENCE OF MAINTENANCE SYSTEMS | |
| Tiberiu Bucur |
| Quality Management Between Past and Present | |
| Natalia Filip |
| Failure Mode Avoidance Paradigm in Automotive Engineering Design | |
| Felician CAMPEAN, Ed HENSHALL, Dave BRUNSON |
| Developing and characterizing new multiphase composite materials for automotive brake | |
| Dana Luca-Motoc, Vasile Luca |
| Predicting, measuring and tailoring electrical properties for new composite materials used in automotive sensors | |
| Dana Luca-Motoc, Ioan Olteanu, Vasile Luca |
| Tool Wear and Durability of Steel to Carbide Ultrasonic Vibrosplintering | |
| Bebe TICA, Stefanita Ciunel |
| Splinters Analysis form Results in the Vibrosplintering Superhards Carbide Steels | |
| Bebe TICA, Stefanita Ciunel |
| Advanced thermolectric materials used for heat recovery | |
| Mihai-Sorin Adam, Corneliu-Bazil Cizmas, Elena Helerea, Gheorghe Scutaru |
| AN OVERVIEW UPON THE RESIDUAL STRESS PRODUCED BY THE METAL CUTTING OF THE AUTOMOTIVE COMPONENTS | |
| Gheorghe BEJINARU-MIHOC |
| THE MACHINE TOOL KINETIC ERRORS INFLUENCE UPON THE PRECISION OF THE SHAPED GEARS USED IN THE VEHICLE MOTORS CONSTRUCTION | |
| Gheorghe BEJINARU-MIHOC |
| SOME RESULTS CONCERNING ON THE MECHANICAL PROPERTIES EVALUATION OF THE CYLINDER-HEAD GASKET MATERIALS | |
| Valeriu Enache, Ioan Szava, Florin Dogaru, Bela Varga |
| The capability study of production processes within a technical project in the industry suppliers of automotive components | |
| Cristian Astalus |
Accident Research and Analysis
| ANALYSIS OF DIFFERENT DATA COMPRESSION METHODS FOR CURRENT DATA ACQUISITION SYSTEM IN DRIVER ASSISTANCE SYSTEM AND SENSOR VALIDATION | |
| Faisal Amin |
| EXPERIMENTAL RESEARCH ON THE STUDY OF KINEMATICS OF VEHICLES INVOLVED IN FRONT-REAR COLLISION | |
| Radu Gaiginschi, Adrian Sachelarie, Lidia Gaiginschi, Iulian Agape, Mihai Pintilei |
| APPLYING THE THEORY OF MULTI-BODY SYSTEMS FOR MODELING THE OCCUPANT KINEMATICS IN AUTOMOBILE'S COCKPIT IN ORDER TO OBTAIN THE HEAD IMPACT VELOCITY WITH THE DASHBOARD | |
| Sorin ILIE, Stefan TABACU, Nicolae-Doru STANESCU, Ion TABACU, Gheorghe CRIVAC |
| The road safety | |
| Vladimir Rievaj, Anton Hudak |
| Passive Protection inTraffic Situations for Reducing Road Accidents | |
| Stefanita Ciunel, Vasile Campian, Ovidiu-Vasile Campian, Bebe TICA |
| Repeatability and Reproductibility of Dummy Performance | |
| Stefanita Ciunel, Vasile Campian, Ovidiu-Vasile Campian, Bebe TICA |
| New technologies for sampling data at road accident | |
| Adrian RUSU |
| COMPARATIVE-CRITICAL STUDY OF THE HIGHLIGHTING POSSIBILITIES OF THE TRAFFIC ACCIDENT CAUSES ASSOCIATIVITY TO TECHNICAL CAUSES | |
| Simona Corpodean, Petru Branzas |
| ASPECTS REGARDING THE INJURY SEVERITY IN VEHICLE-PEDESTRIAN COLLISIONS | |
| Bogdan Benea, Dorin Dumitrascu, Alexandru Plaiasu |
| MAIN INJURIES PRODUCT TO PEDESTRIAN BY IMPACT WITH DIFFERENT PARTS OF THE VEHICLE | |
| Dorin Dumitrascu, Bogdan Benea |
| MATHEMATICAL MODEL OF HUMAN BODY HEAD AND THORAX INJURY LEVEL SIMULATION FOLLOWING THE MOTOR VEHICLE-PEDESTRIANS COLLISIONS | |
| Adrian Soica, Mircea Nastasoiu, Nicolae Ispas, Stelian Tarulescu |
| ANALYSIS OF SOME FACTORS ON THE THEORETICAL AND PRACTICAL TRAINING IN THE DRIVING LICENSE GAINING PROCESS | |
| Doru Baldean, Simona Corpodean, Eusebiu Baldean |
| INFLUENCE OF VARIOUS ANTHROPOMETRIC CONSTITUTION OF PEDESTRIAN IN CASE OF VEHICLE-PEDESTRIAN IMPACT | |
| Daniel Trusca, Adrian Soica, Stelian Tarulescu, Alexandru Plaiasu |
| NIGHTTIME VISIBILITY, COMPONENT OF ROAD SAFETY | |
| Alexandru Plaiasu, Gheorghe Ciolan, Ion Preda |
| PROPOSAL OF NEW VERSATILES DEVICES FOR USES IN TRAFFIC ACCIDENT RECONSTRUCTION | |
| Nicolae ISPAS, Adrian SOICA, Dragos-Sorin DIMA |
| EXPERIMENTAL STUDY OF THE VEHICLE-PEDESTRIAN COLLISIONS | |
| Dragos-Sorin Dima, Florin Rusitoru, Adrian SOICA, Stelian Tarulescu |
| The Crash Recorder | |
| Anton Brunner, Serban Radu, Julian Rothfuss |
